PM 551 W RD3 X Alu 1.2 mm, 4 m

Water-cooled MIG/MAG function torch with high-quality OLED graphic display
Ex works, equipped for welding aluminium wires

Display and setting of:

Welding current and wire feed speed
Voltage correction
Program and JOB selection
Operating mode and welding type
Welding process switching
Interferences and error messages

Xnet support:

Selection of welding tasks according to welding sequence plan
Component management
Automatic LED lighting when the welding torch is moved
The complete range of functions of PM function torches is only available when used in connection with the Titan XQ puls machine series
If the function torch is connected to EWM MULTIMATRIX or Taurus Steel welding machines, the welding torch switches to compatibility mode and has limited functions
If the welding torch is connected to third-party machines or welding machines without MULTIMATRIX technology, welding is not possible
Safe and rugged; without control cable and additional connector plug
Recommendation:
For feeding steel wires, we recommend using a steel liner with a capillary tube
For feeding CrNi, aluminium, flux-cored and CuSi wires, we recommend a PA combined liner with a guide tube (alternatively you can use a Teflon or carbon Teflon liner)

Equipment as delivered for Ø 1.0 mm aluminium wire:

Gas nozzle Ø 15 mm; 66 mm
Gas diffuser Ø 20 mm; 26 mm
Contact tip forced contacting M9 x 35 mm; Ø 1.0 mm and contact tip holder M9 x 35 mm
Combined liner PA; Ø 1.5 mm x 4 mm

Equipment as delivered for Ø 1.2 mm aluminium wire:

Gas nozzle Ø 15 mm; 66 mm
Gas diffuser Ø 20 mm; 26 mm
Contact tip forced contacting M9 x 35 mm; Ø 1.2 mm and contact tip holder M9 x 35 mm
Combined liner PA; Ø 2 mm x 4 mm

Duty cycle CO2:650 A / 100 %
Duty cycle M21:550 A / 100 %
Duty cycle M21 pulse:500 A / 100 %
Wire Ø:0.8 mm - 2 mm
Ø wire ex works:1.2 mm
Connection poles:Euro torch connector
Connection:Euro torch connector
Hose package length:4 m
Bend angle torch neck:45 °
Operating weight:1.1 kg
Approvals:CE sign