- Product no.:
- 094-700004-03904
- Manufacturer:
- EWM neu
- More products of:
- EWM neu
Water-cooled MIG/MAG welding torch with replaceable neck (torch neck rotatable through 360°)
Automatic LED lighting when the welding torch is moved
The complete range of functions of PM function torches is only available when used in connection with the Titan XQ puls machine series
If the function torch is connected to EWM MULTIMATRIX or Taurus Steel welding machines, the welding torch switches to compatibility mode and has limited functions
If the welding torch is connected to third-party machines or welding machines without MULTIMATRIX technology, welding is not possible
Secure hold thanks to rubber inserts in the grip
The flexible ball joint makes it comfortable to work, even for positional welding
The torch trigger protection prevents the arc being ignited unintentionally
Recommended use for 6.5 m hose packages:
For steel and CrNi with a wire diameter of 1.2 to 1.6 mm only
Recommendation:
For feeding steel wires, we recommend using a steel liner with a capillary tube
For feeding CrNi, aluminium, flux-cored and CuSi wires, we recommend a PA combined liner with a guide tube (alternatively you can use a Teflon or carbon Teflon liner)
Equipment as supplied (steel wire Ø 1.2 mm):
Gas nozzle Ø 15 mm; 71 mm
Gas diffuser Ø 17 mm; 14 mm
Contact tip M9 x 35 mm; Ø 1.2 mm and contact tip holderM9 x 34.5 mm
Worn o-rings have a negative impact on the welding torch cooling. Insufficient cooling causes damage to the welding torch. Check and if necessary grease or replace all o-rings when converting the welding torch! Please note spare parts list in the ?Push/pull welding torches? chapter.
Steel liner red; Ø 2 mm x 4.6 mm
Duty cycle CO2:500 A / 100 %
Duty cycle M21:450 A / 100 %
Duty cycle M21 pulse:350 A / 100 %
Wire Ø:0.8 mm - 1.6 mm
Connection poles:Euro torch connector
Connection:Euro torch connector
Hose package length:4 m
Bend angle torch neck:45 °
Operating weight:1.28 kg
Approvals:CE sign
